Instructions for Assembly and Operation of Rochester PARTICLE Cosmic Ray Telescopes

Cable Connections (all equipment should be off before you start!)

· Connect board to computer via the gray serial cable with the blue connectors.

o Plug into the connector on the board

o and into the "Serial B" port on the computer

· Plug cable from power adapter into connector on the board.

o Match the red side of the connector on the power cable to the red side of the connector on the board.

o Plug the power adapter into the wall.

o Check to be sure that both of the yellow power LEDs on the board are on.

Choose from the following two options for the type of set-up that you have: